yyyyyy x. yyyyyy

0000 xxxxxx xxxx , xxxx , xxxxx 00000 - Austin, TX 78748
xxx-xxx-xxxx
abc@xyz.com

yyyyyy x. yyyyyy

Engineering Technician

yyyyyy x. yyyyyy

 

Offering progressive experience as an Engineering Technician in the Etch Department, with consistent results in achieving objectives on time and within budget. Talent for defining and resolving discrepancies to avoid unnecessary cost expenditures. Proactively establish and manage key relationships with decision makers and strategic partners. Effectively define, develop and implement targeted action plans to maximize quality, precision, and timeliness of work in an extremely demanding manufacturing environment. Accomplished in working with customers at their site to install and tune equipment.

yyyyyy x. yyyyyy

Project Management Testing Quality 300mm Semiconductor Manufacturing Equipment

Hard Working Versatile Final Assembly Software/Hardware Integration

Installation/Configuration End-user Training Database Administration

yyyyyy x. yyyyyy

 

  Recognized as a Successful Individual Contributor by senior management on numerous occasions throughout tenure with Applied Materials.

  Consistently completed final test on all assigned systems on or before schedule time.

  Successfully maintained zero violations of safety hazards or any near miss throughout the entire appraisal period.

  Independently worked the systems alone on night shift, applying solid industry knowledge and resources; achieved above average pass down reports nightly.

  Played a key role as part of a team that reduced physically damage DMRs by 58% and improved DMR/unit rates to 3.7 per system shipped against a goal of 4 per unit shipped.

  In 2008, awarded for consistent attendance, with no use of any sick time throughout the year.

yyyyyy x. yyyyyy

 

Applied Materials, Austin, TX                                                                                         2002-2009

Engineering Technician II, Etch Department

  Chosen as 1 of 2 contractors out of 25 candidates for promotion to permanent employee status within only 6 months, due to exceptional performance and dedication.

  Contributed industry expertise toward performing final assembly, integration, and testing of hardware and software for the world s leading designer and manufacturer of semiconductor-manufacturing equipment.

  Mentored, motivated and developed new employees, playing an instrumental role in the development of top performing teams.

  Strategically installed and configured software, assembled components and powered up systems in a clean-room environment, instrumental to supporting productivity, efficiency and quality of operations.

  Steered up to 40 quality and performance tests on each tool in the system, demonstrating exceptional multitasking and prioritizing abilities in achieving goals and timelines.

 

 

 

Page 1 of 2

 

Michael W. Scott, Jr.                                                                                                Page 2 of 2

yyyyyy x. yyyyyy

 

Career Background continued

 

 

Applied Materials, Austin, TX                                                                                         2002-2009

Engineering Technician II, Etch Department

-Continued-

  Exhibited strong attention to detail and organizational skills in proficiently generating reports and entering data into multiple databases.

  Conducted test runs of etching of 300mm equipment, running at least 50 wafers through the device prior to releasing systems for shipment to customers.

  Tore down equipment and prepared for shipping after all tests were passed, with strong focus on optimizing productivity, efficiency and quality.

  Personally appointed to join a team to travel to customers sites to perform installations and end-user training.

 

Prior Experience

 

Lead, Receiving Warehouse - Eagle Distributors, Austin, TX; 1999-2002

 

Final Integration Specialist - Applied Materials / Adecco Staffing, Austin, TX; 1997-1999

 

Assembly & Test Technician - Luminex, Austin, TX; 1995-1997

yyyyyy x. yyyyyy

Applied Global University, 482 hours

 

300mm DPS ACP/Opus Certification (Rev 1) (TVEtchTACPDPSII), 2008
300mm Axiom ACP/Opus Certification (Rev 1) (TVEtchTACPAxiom), 2008
Opus Factory Interface Certification (Rev 1) (TVEtchFTOpus-FI), 2008
Opus Mainframe Certification (Rev 1) (TVEtchFTOpus-MF), 2008
Opus Software Certification (Rev 1) (TVEtchFTOpus-SWR), 2008
300mm Enabler Certification (Rev 1) (TVEtchTEnabler), 2007
300mm ACP IFT Certification (Rev 1) TVEtchFT, 2007

300mm Producer Etch Chamber Certification (Rev 1) (TVEtchTProducer), 2007
300mm eMax Certification (Rev 1) (TVEtchTeMax), 2007
300mm Hart Certification (Rev 1) (TVEtchTHart), 2007

300mm DPS II Certification (Rev 1) (TVEtchTDPSII), 2007
300mm Axiom & ASP II Certification (Rev 1) (TVEtchTAxiom), 2007
300mm System Installation/Tier 0 (Rev 1) (TVEtchFT3MMTier0), 2006
300mm Producer Etch MF (Rev 1) (TVEtchFT3MMPMF), 2006
200mm Certification (Rev 1) TVEtchFT200mm, 2006
200mm Centura I & 2 Certification (Rev 1) (TVEtchFT2MMCII), 2006
300mm Producer Etch IFT Certification (Rev 1) TVEtchFT3mm, 2004
300mm Software (Rev 1) (TVEtchFT3MMSFTWR), 2004
300mm Factory Interface (Rev 1) (TVEtchFT3MMFI), 2004
300mm Pre-Powerdown (Rev 1) (TVEtchFT3MMPPD), 2004
300mm Mainframe (Rev 1) (TVEtchFT3MMMF), 2004
300mm Remotes (Rev 1) (TVEtchFT3MMRmts), 2004
300mm Gas Panel (Rev 1) (TVEtchFT3MMGP), 2004
300mm Centura AP IFT Certification (Rev 2) TVEtchFT300mm, 2004

 

 

 

 

yyyyyy x. yyyyyy

0000 xxxxxx xxxx , xxxx , xxxxx 00000 - Austin, TX 78748
xxx-xxx-xxxx
abc@xyz.com

yyyyyy x. yyyyyy

 

Date

 

 

Contact Name, Title

Company Name

Address

City/State/Zip Code

 

Dear__________________:

 

I am currently exploring new career opportunities and to acquaint you with my qualifications, I am submitting my resume for review.  In advance, thank you for your time and consideration.

 

As demonstrated in the accompanying resume, I offer a strong track record as an Engineering Technician, with numerous industry certifications.  Over the course of my career, I:

 

  Was recognized as a Successful Individual Contributor by senior management on numerous occasions throughout tenure with Applied Materials.

  Consistently completed final test on all assigned systems on or before schedule time.

  Successfully maintained zero violations of safety hazards or any near miss throughout the entire appraisal period.

  Independently worked the systems alone on night shift, applying solid industry knowledge and resources; achieved above average pass down reports nightly.

  Played a key role as part of a team that reduced physically damage DMRs by 58% and improved DMR/unit rates to 3.7 per system shipped against a goal of 4 per unit shipped.

  In 2008, awarded for consistent attendance, with no use of any sick time throughout the year.

 

I am now eager to contribute my strategic planning skills and dynamic engineering technician abilities toward collaborating in your success as a key member of your team.  I am confident that I could be a valuable asset to your organization in achieving both immediate and long-term goals, and look forward to meeting with you in the near future to discuss my qualifications and how they support your company vision.

 

Professionally,

 

 

 

Michael W. Scott, Jr.